Change VAT
0845 519 4701 sales@magnetexpert.com

25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull

code:n/a

These small rectangular ferrite magnets are magnetised with their north and south poles on the same face for increased magnetic performance. Each magnet will hold up to 0.41kg in a vertical position against a steel surface.

1. select Pack Size
Pack Qty Pack Price Unit Price
Close

1. Select Pack Size

25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 20)
25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 20)
These small rectangular ferrite magnets are magnetised with their north and south poles on the same face for increased magnetic performance. Each magnet will hold up to 0.41kg in a vertical position against a steel surface.
  • Pack of 20
  • 25mm x 10mm x 5.1mm
  • Each magnet is magnetised on one face only with a striped, north-south polarity to maximise performance
  • Each magnet can support a steel weight of up to 0.41kg vertically from the magnetic face when in flush contact with a mild steel surface
  • Resistant to demagnetisation and corrosion without any extra coating

These rectangular ferrite magnets, also known as ceramic magnets, are magnetised with a striped north-south polarity which focuses the magnetism on one face. The pole pitch runs across the width of the magnet and they also have a dimple on the non-magnetic face for easy identification. Ferrite magnets have a high resistance to corrosion and demagnetisation and their great advantage is that they can operate in temperatures of up to 180 degrees Celsius. These magnets are ideal for many applications where strength is not the most important factor such as craft making, model making and other non-technical applications.

 £6.40 £0.32 each
Close

1. Select Pack Size

25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 200)
25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 200)
These small rectangular ferrite magnets are magnetised with their north and south poles on the same face for increased magnetic performance. Each magnet will hold up to 0.41kg in a vertical position against a steel surface.
  • Pack of 200
  • 25mm x 10mm x 5.1mm
  • Each magnet is magnetised on one face only with a striped, north-south polarity to maximise performance
  • Each magnet can support a steel weight of up to 0.41kg vertically from the magnetic face when in flush contact with a mild steel surface
  • Resistant to demagnetisation and corrosion without any extra coating

These rectangular ferrite magnets, also known as ceramic magnets, are magnetised with a striped north-south polarity which focuses the magnetism on one face. The pole pitch runs across the width of the magnet and they also have a dimple on the non-magnetic face for easy identification. Ferrite magnets have a high resistance to corrosion and demagnetisation and their great advantage is that they can operate in temperatures of up to 180 degrees Celsius. These magnets are ideal for many applications where strength is not the most important factor such as craft making, model making and other non-technical applications.

 £46.00 £0.23 each
Close

1. Select Pack Size

25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 400)
25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 400)
These small rectangular ferrite magnets are magnetised with their north and south poles on the same face for increased magnetic performance. Each magnet will hold up to 0.41kg in a vertical position against a steel surface.
  • Pack of 400
  • 25mm x 10mm x 5.1mm
  • Each magnet is magnetised on one face only with a striped, north-south polarity to maximise performance
  • Each magnet can support a steel weight of up to 0.41kg vertically from the magnetic face when in flush contact with a mild steel surface
  • Resistant to demagnetisation and corrosion without any extra coating

These rectangular ferrite magnets, also known as ceramic magnets, are magnetised with a striped north-south polarity which focuses the magnetism on one face. The pole pitch runs across the width of the magnet and they also have a dimple on the non-magnetic face for easy identification. Ferrite magnets have a high resistance to corrosion and demagnetisation and their great advantage is that they can operate in temperatures of up to 180 degrees Celsius. These magnets are ideal for many applications where strength is not the most important factor such as craft making, model making and other non-technical applications.

 £76.00 £0.19 each
Close

1. Select Pack Size

25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 800)
25 x 10 x 5.1mm thick Y10 Ferrite Magnets - 0.41kg Pull (Pack of 800)
These small rectangular ferrite magnets are magnetised with their north and south poles on the same face for increased magnetic performance. Each magnet will hold up to 0.41kg in a vertical position against a steel surface.
  • Pack of 800
  • 25mm x 10mm x 5.1mm
  • Each magnet is magnetised on one face only with a striped, north-south polarity to maximise performance
  • Each magnet can support a steel weight of up to 0.41kg vertically from the magnetic face when in flush contact with a mild steel surface
  • Resistant to demagnetisation and corrosion without any extra coating

These rectangular ferrite magnets, also known as ceramic magnets, are magnetised with a striped north-south polarity which focuses the magnetism on one face. The pole pitch runs across the width of the magnet and they also have a dimple on the non-magnetic face for easy identification. Ferrite magnets have a high resistance to corrosion and demagnetisation and their great advantage is that they can operate in temperatures of up to 180 degrees Celsius. These magnets are ideal for many applications where strength is not the most important factor such as craft making, model making and other non-technical applications.

 £120.00 £0.15 each
Higher Quantities? Contact us today for volume pricing.
£0.32
Item in Stock  |  Same day dispatch when ordered before 4pm (Mon - Fri)
  • 25mm x 10mm x 5.1mm
  • Each magnet is magnetised on one face only with a striped, north-south polarity to maximise performance
  • Each magnet can support a steel weight of up to 0.41kg vertically from the magnetic face when in flush contact with a mild steel surface
  • Resistant to demagnetisation and corrosion without any extra coating

These rectangular ferrite magnets, also known as ceramic magnets, are magnetised with a striped north-south polarity which focuses the magnetism on one face. The pole pitch runs across the width of the magnet and they also have a dimple on the non-magnetic face for easy identification. Ferrite magnets have a high resistance to corrosion and demagnetisation and their great advantage is that they can operate in temperatures of up to 180 degrees Celsius. These magnets are ideal for many applications where strength is not the most important factor such as craft making, model making and other non-technical applications.