Change VAT
0845 519 4701 sales@magnetexpert.com

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull

code:n/a

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

1. select Pack Quantity
Pack Qty Pack Price Unit Price

1. Select Pack Quantity

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 1)
80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 1)

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

  • Pack of 1.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£4.80 £4.80 each

1. Select Pack Quantity

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 4)
80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 4)

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

  • Pack of 4.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£18.24 £4.56 each

1. Select Pack Quantity

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 10)
80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 10)

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

  • Pack of 10.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£43.32 £4.33 each

1. Select Pack Quantity

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 20)
80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 20)

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

  • Pack of 20.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£82.31 £4.12 each
--

1. Select Pack Quantity

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 40)
80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 40)

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

  • Pack of 40.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£156.39 £3.91 each Email me when back in stock
--

1. Select Pack Quantity

80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 80)
80mm dia x 18mm thick Ferrite Pot Magnet with M10 External Thread - 57kg Pull (Pack of 80)

These ferrite pot magnets are chrome plated with a M10 external thread on non-magnetic face.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

  • Pack of 80.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

£297.13 £3.71 each Email me when back in stock
Higher Quantities? Contact us today for volume pricing.
£4.80
Item in Stock  |  Same day dispatch when ordered before 4pm (Mon - Fri)
Order in the next 11 hrs 55 mins 19 secs for Guaranteed Delivery on Tuesday 10th, December.
*UK Mainland Only - Choose Next Working Day Delivery at Checkout.
  • Pack of 1.
  • 80mm diameter x 18mm thick with a M10 External Thread.
  • +/-0.1mm tolerance.
  • Each magnet can support 57kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it.

Suitable for use with a tapped hole, a countersunk hole or with a threaded stud for convenient mounting.

The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.