Skip to content
WELCOME TO OUR NEW & IMPROVED WEBSITE!

Leading Magnet Supplier

Specialists In Bespoke Magnets

Dedicated Account Managers

Expert Technical Advice

Basket
Oh No! Your basket is empty
66mm dia x 10mm thick x 8mm hole Ferrite Pot Magnet - 39kg Pull
66mm dia x 10mm thick x 8mm hole Ferrite Pot Magnet - 39kg Pull
Code: F4MG66-1

66mm dia x 10mm thick x 8mm hole Ferrite Pot Magnet - 39kg Pull

These medium-sized, ferrite (Y30BH) pot magnets are chrome plated with a plain through hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

Select Pack Size
£4.86 (Inc. VAT)£4.05 (Ex. VAT)
In Stock
Contact Us
Ask A Question

Please fill out the following form to Ask a Question about this product:

Email A Friend

Please fill out the following form to Tell a Friend about this product:

  • 66mm diameter x 10mm thick with an 8mm diameter plain through hole for a screw or bolt (plus secondary 4mm hole).
  • Each magnet can support 39kg pull vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Chrome plated steel shell.
  • Can be fixed in place with 8mm diameter cap head screws.

Outstanding value for money, these ferrite pot magnets are made of a ferrite magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them a strong hold for their size. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface. These magnets come with a safe-handling warning; because they are so powerful they can be dangerous if not handled carefully.

You May Also Like