- Home
- /
- Magnet Materials & Standard Assemblies
- /
- 26mm dia x 6mm thick x 6mm c/sink PTFE Spray Coated Neodymium Magnet - 6kg Pull (South)
26mm dia x 6mm thick x 6mm c/sink PTFE Spray Coated Neodymium Magnet - 6kg Pull (South)
High-performance countersunk Neodymium (N42) magnet, available with either pole on the countersunk face. PTFE coated for high corrosion resistance.
Please fill out the following form to Ask a Question about this product:
Please fill out the following form to Tell a Friend about this product:
- 26.4mm diameter x 6mm thick with a 6.2mm diameter countersunk hole for fixing.
- +/-0.1mm tolerance.
- Each magnet has its south pole on the countersunk face.
- Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface.
- PTFE coated to increase friction and prevent marking other contact surfaces.
- Can be fixed in place with our 6mm diameter countersunk screws.
Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the north pole on the countersunk face.
- 26.4mm diameter x 6mm thick with a 6.2mm diameter countersunk hole for fixing.
- +/-0.1mm tolerance.
- Each magnet has its south pole on the countersunk face.
- Each magnet can support 6kg pull vertically from the magnetic face when in flush contact with a mild steel surface.
- PTFE coated to increase friction and prevent marking other contact surfaces.
- Can be fixed in place with our 6mm diameter countersunk screws.
Ideal for furniture fixings, hanging artwork and keeping doors and drawers closed, countersunk magnets have a central hole which allows them to be fixed to non-magnetic surfaces with a screw. Because these magnets have a PTFE-coating they are ideal for using to attract fragile or easily marked surfaces, the PTFE coating increases friction, softens impacts and prevents marking. Countersunk magnets with opposite poles on the countersunk face can be used to attract two surfaces or two opposing countersunk magnets with the same pole on the countersunk face can be used to create a damping, shock absorbing or repelling effect. Also available with the north pole on the countersunk face.
You May Also Like