Change VAT
0845 519 4701 sales@magnetexpert.com

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull

code:n/a

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

1. select Pack Size
Pack Qty Pack Price Unit Price
Close

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 1)
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 1)

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • 22mm diameter x 10mm tall with a M5 threaded hole.
  • +/-0.1mm tolerance.
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Rubber-coated to increase friction and prevent marking other contact surfaces.
  • M5 threaded hole for assembly.

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

 £4.12 £4.12 each
Close

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 4)
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 4)

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 4.
  • 22mm diameter x 10mm tall with a M5 threaded hole.
  • +/-0.1mm tolerance.
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Rubber-coated to increase friction and prevent marking other contact surfaces.
  • M5 threaded hole for assembly.

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

 £14.42 £3.61 each
Close

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 40)
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 40)

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 40.
  • 22mm diameter x 10mm tall with a M5 threaded hole.
  • +/-0.1mm tolerance.
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Rubber-coated to increase friction and prevent marking other contact surfaces.
  • M5 threaded hole for assembly.

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

 £131.84 £3.30 each
Close

1. Select Pack Size

22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 80)
22mm dia x 10mm thick x M5 thread hole Rubber Coated Pot Magnet - 3.8kg Pull (Pack of 80)

Small and strong, these high-performance, rubber-coated Neodymium (N42) pot magnets have a threaded hole on the non-magnetic face. Magnetism is concentrated on one face to provide the maximum holding force.

  • Pack of 80.
  • 22mm diameter x 10mm tall with a M5 threaded hole.
  • +/-0.1mm tolerance.
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
  • Rubber-coated to increase friction and prevent marking other contact surfaces.
  • M5 threaded hole for assembly.

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking. An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.

 £230.72 £2.88 each
Higher Quantities? Contact us today for volume pricing.
£4.12
Item in Stock  |  Same day dispatch when ordered before 4pm (Mon - Fri)
Order in the next 4 hrs 30 mins 49 secs for Guaranteed Delivery on Wednesday 21st October.
*UK Mainland Only - Choose Next Working Day Delivery at Checkout.
  • 22mm diameter x 10mm tall with a M5 mild steel threaded hole
  • Each magnet can support 3.8kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness
  • +/-0.1mm tolerance
  • Rubber-coated to increase friction and prevent marking other contact surfaces
  • M5 threaded hole for assembly

Neodymium pot magnets are made of a powerful Neodymium magnet sunken in to a steel shell meaning that the north pole is on the centre of the magnetic face and the south pole is on the outer edge around it. The steel pot increases the adhesive force of the magnets giving them an incredible hold for their size. Because these magnets have a rubber-coating they are ideal for using to attract fragile or easily marked surfaces, the rubber coating increases friction, softens impacts and prevents marking.  An added advantage of pot magnets is that they are resistant to chipping or cracking following constant impact with a steel surface.